masking-tape-high-temperature-heat-resistant-laminated-glass-edges-sealing-29

masking-tape-high-temperature-heat-resistant-laminated-glass-edges-sealing-30

—————
If you want to order too, please contact Peter Lin
Mail: cnc@cncGlass.com
Whatsapp: 0086 15013829504

EVAFORCE® SUPER CLEAR INTERLAYER FILM:for making architectural safety laminated glass


Super clear eva glass interlayer film
Outdoor white eva interlayer film series
Green tape for laminating sealing vacuuming, heating resistant
Thermal cutter trimming laminated glass edges remains by heating
www.cncGlass.com
www.cncEva.com
www.cncnext.com

Green Tape Preventing Melted Eva Film Over Flowing Out of Laminated Glass Edges in the Oven






polyester tape, high temperature tape, glass masking tape from Peter Lin on Vimeo.

CNC Silicone Vacuum Bag EVA laminating furnace EVA Glass Laminating Accessories from Peter Lin on Vimeo.

[slideboom id=1591895&w=425&h=370]

blades-tips-heads-of-glass-edges-cleaning-hot-knife-14

blades-tips-heads-of-glass-edges-cleaning-hot-knife-15

blades-tips-heads-of-glass-edges-cleaning-hot-knife-1
masking-tape-high-temperature-heat-resistant-laminated-glass-edges-sealing-31

masking-tape-high-temperature-heat-resistant-laminated-glass-edges-sealing-32

masking-tape-high-temperature-heat-resistant-laminated-glass-edges-sealing-33

masking-tape-high-temperature-heat-resistant-laminated-glass-edges-sealing-34

masking-tape-high-temperature-heat-resistant-laminated-glass-edges-sealing-35

masking-tape-high-temperature-heat-resistant-laminated-glass-edges-sealing-25

masking-tape-high-temperature-heat-resistant-laminated-glass-edges-sealing-26

masking-tape-high-temperature-heat-resistant-laminated-glass-edges-sealing-27

masking-tape-high-temperature-heat-resistant-laminated-glass-edges-sealing-28

—————
If you want to order too, please contact Peter Lin
Mail: cnc@cncGlass.com
Whatsapp: 0086 15013829504

EVAFORCE® SUPER CLEAR INTERLAYER FILM:for making architectural safety laminated glass


Super clear eva glass interlayer film
Outdoor white eva interlayer film series
Green tape for laminating sealing vacuuming, heating resistant
Thermal cutter trimming laminated glass edges remains by heating
www.cncGlass.com
www.cncEva.com
www.cncnext.com

Green Tape Preventing Melted Eva Film Over Flowing Out of Laminated Glass Edges in the Oven






polyester tape, high temperature tape, glass masking tape from Peter Lin on Vimeo.

CNC Silicone Vacuum Bag EVA laminating furnace EVA Glass Laminating Accessories from Peter Lin on Vimeo.

[slideboom id=1591895&w=425&h=370]

blades-tips-heads-of-glass-edges-cleaning-hot-knife-14

blades-tips-heads-of-glass-edges-cleaning-hot-knife-15

blades-tips-heads-of-glass-edges-cleaning-hot-knife-1

Tips of How to Use Green Tape

GREEN TAPE is to perfectly prevent the melt EVA FILM overflowing through laminated glass edges in the oven when heating and under vacuuming press (the GREEN TAPE is High temperature resistance).

If we use the CNC GREEN TAPE to seal the edges of pre-laminated glass to prevent the exit out of the EVA in the glass laminating oven, will the GREEN TAPE prevent the de-airing vacuuming? do we need to make some holes on the GREEN TAPE for vacuuming the air out?
Written by Peter Lin(cnc@cncGlass.com) and all rights reserved by www.cncGlass.com

It depends. If you don’t make holes on the CNC GREEN TAPE, and you make EVA laminated glass successfully without bubbles, then you don’t need to make holes on the GREEN TAPE, so you can get cleaner result of the edges of the final laminated glass. But if you don’t make holes on the GREEN TPAE, but you face bubbles in the corners or edges of the laminated glass, then it’s better you make some holes on the GREEN TAPE to help pre-laminated glass de-airing vacuuming.
Written by Peter Lin(cnc@cncGlass.com) and all rights reserved by www.cncGlass.com

Does CNC GREEN TPAE leave glues on the glass?
NO! No remains of CNC GREEN TAPE left on glass surface after peeling off. CNC GREEN TPAE can stand continuously heating more than 180℃ with strong tear resistance.

What is the specifications of CNC GREEN TAPE?
25mm*66M/roll
30mm*66M/roll
35mm*66M/roll
40mm*66M/roll
50mm*66M/roll
Written by Peter Lin(cnc@cncGlass.com) and all rights reserved by www.cncGlass.com